HUB75 Bridge Installer

Install or repair the firmware over USB-C. Works in Chrome or Edge on a computer.

This browser can't talk to USB devices. Open this page in Chrome or Edge on a Windows, Mac or Linux computer.

Before you start

If the board is working and on your network, it's easier to update from its own Update page. Use this installer when the board won't start or you can't reach it.
Connect the board to this computer with a USB-C data cable. Some cables only charge.
Firmware: loading…

Install

Keep my settings
Installs the firmware. Network, panel layout and password stay as they are. Erase everything
Back to factory settings: address from your router, one 64 × 64 panel on Port 1, no password.

Details

If it doesn't connect

Try another USB-C cable or USB port.
Put the board in download mode by hand: unplug USB-C and the 5 V power, hold the BOOT button, plug USB-C back in, then let go. Click Connect & Install again.
When it's done, unplug USB-C and power the board as usual.

More help: HUB75 Bridge FAQ